Leapers UTG-PRO P.O.I Aluminium 1" ID/Profile Picatinny Scope Mount
Designed to fit on Mil-spec 1913 Picatinny Rail Platforms and machined from 6061-T6 aluminium alloy and 4605 steel with matte black hard coat anodize.
Leapers UTG-PRO P.O.I Aluminium 1" Picatinny Scope Mounts are performance guaranteed to withstand the toughest field conditions and won't move under heavy recoil, and they are Proudly Made in the USA and are also .50 BMG RATED.
Low Profile P.O.I® (Precision Optics Interface) Rings Have a 23mm Center Height to Fit Optics with a 1" Tube, and up to a 45mm Outer Objective
Medium Profile P.O.I® (Precision Optics Interface) Rings Have a 28mm Center Height to Fit Optics with a 1" Tube, and up to a 55mm Outer Objective
High Profile P.O.I® (Precision Optics Interface) Rings Have a 33mm Center Height to Fit Optics with a 1" Tube, and up to a 65mm Outer Objective
Base to fit on Picatinny rails dimensions. 2 Piece Ring Set, Each Equipped with 4 Top Torx Screws and Designed with a 22mm Ring Width.
The Innovative P.O.I® (Precision Optics Interface) Addresses 3 of the Most Critical Areas in Scope Rings:
- Progressively Machined for a Precise Inner Diameter Scope Interface to Achieve a Seamless Ring-to-Scope Interaction
- Low Profile and Flush-fitting Locking Side Plate Controlled by Dual Spring-Loaded Guide Rods Interfacing with the Rail with Torx Screw Locking to Ensure Secure and Repeatable Zero Hold
- Square-shaped Integral Recoil Stop Interfacing with a Picatinny Slot via Complete Surface Contact to Eliminate the Possibility of Forward and Aft Movement from Recoil Vibrations
**NOTE** We recommend tightening the ring top screws with a torque value of about 25 inch-lb and the side plate screws with a torque value of about 45 inch-lb.
- Low, Medium or High profile
- 1" ID scope mounting rings
- 22mm ring width
- Scope ring mount for a precise fit on MIL-STD-1913 picatinny rails
- Significant lightening cuts to massively reduce weight without compromising durability
- Precision CNC machined from aircraft grade aluminium and finished in a matte black anodize
- Radiused edges and corners to prevent snagging, scratching, or tearing of other gear and for effortless access to scope windage and elevation turrets
- Single mount utilizes locking Torx screws and square-shaped integral recoil stops for a secure zero hold
- Includes a T25 Torx wrench for simple and user-friendly installation
Item Number | RWU012510, RWU012515, RWU012520 |
Type/Style | For Picatinny Rails |
Inside Diameter | 1" ID |
Ring Width | 22mm |
Saddle Height | 10mm Low, 15mm Medium, 20mm High Profile |
Centre Heigth | 23mm Low, 28mm Medium, 33mm High Profile |
Screws Per Ring | Four |
Screw Type | Torx |
Material | Aircraft Aluminium |
Finish | Matte Black |
- Base to fit on Picatinny rails dimensions
- 1 x Leapers UTG-PRO P.O.I Aluminium 1" ID/Profile Picatinny Scope Mount - Matte Black (choose option)
- 1 x T25 Torx wrench