Vortex Hunter Alloy 30mm ID Picatinny/Weaver Scope Mounting Rings
Mounting to a Picatinny or Weaver type rail, the standard 2-screw Hunter rings are a nice match for general hunting setups.
Made from aircraft-grade 6061-T6 aluminum for optimum strength. Available in three heights for 30mm tubes. This model features a fitted weaver or picatinny style firearm mounting base.
Sizing up your requirements: Vortex scope ring measurements are taken from the center of the riflescope tube to the top surface of the mount base.
**Please Note** We do not recommend the Hunter Rings for use on heavy recoiling rifles.
OUR VORTEX VIP WARRANTY IS ABOUT YOU, NOT US.
VIP stands for a Very Important Promise to you, our customer. We will repair or replace your Vortex® product in the event it becomes damaged or defective-at no charge to you. If we cannot repair your product, we will replace it with a product in perfect working order of equal or better physical condition.
You see, it doesn't matter how it happened, whose fault it was or where you purchased it. If you ever have a problem, no matter the cause, we promise to take care of you. You can count on the VIP Warranty for all Vortex Optics riflescopes, prism scopes, red dots, rangefinders, binoculars, spotting scopes, tripods and monoculars.
UNLIMITED LIFETIME WARRANTY, FULLY TRANSFERABLE, NO RECEIPT NEEDED.
The VIP Warranty does not cover loss, theft, deliberate damage or cosmetic damage that does not hinder the performance of the product.
- Anodized black matte finish
- 30mm ID scope mounting rings
- Hex key and blade screws for easy removal and installation
- Precision machined from lightweight aircraft-grade 6061-T6 aluminum for optimum strength
- Base to fit on weaver or picatinny dimensions
- Sizing up your requirements: Vortex scope ring measurements are taken from the center of the riflescope tube to the top surface of the mount base.
Item Number |
VOMRNGL, VOMRNGM, VOMRNGH |
Type/Style | Picatinny/Weaver |
Inside Diameter | 30mm ID |
Ring Width | 18mm |
Centre Scope Height |
Low: .75 inches (19.0 mm) Medium: .94 inches (24.0 mm) High: 1.22 inches (31.0 mm) |
Ring Weight |
Low: 37 grams (1.3 oz) Medium: 41 grams (1.44 oz) High: 49 grams (1.72 oz) |
Screws Per Ring | Two (Top Clamp Screws) |
Ring Screws | 15 in/lbs |
Base Clamp Screws | 25-30 in/lbs |
Material | 6061-T6 Aircraft Aluminium |
Finish | Matte Black |
- 30mm ID scope mounting rings
- This model features a fitted weaver or picatinny style firearm mounting base
- 1 x Set of Vortex Hunter Alloy 30mm ID Picatinny/Weaver Scope Mounting Rings - Matte Black (choose option)
- 1 x Allen Key