- Unscrew the expander-decapping rod until the decapping pin is free of the primer flash hole in the stuck case
- Secure the reloading die in a vice and drill the case head with the included drill bit
- Drill straight through the primer pocket and the primer flash hole
- Next tap the case head the included 1/4-20 tap
- Place the stuck case remover body onto the case head and turn the cap screw with the allen-type wrench until the case is pulled from the die
- Discard the case and reassemble the die
- Includes Tap, Drill bit, Allen screw, Allen wrench and remover
- 1 x RCBS Stuck Case Remover
- Includes Tap, Drill bit, Allen screw, Allen wrench and remover
Write Your Own Review