Bohning 4" Blazer Tiger Arrow Wraps

For increased visibility and style, dress up your hunting or target arrows with Bohning arrow wraps. Be an individual, show your personality with an arrow wrap. Blazer Wraps help you visually locate or identify your arrows in flight, on the ground, on the shooting line or in the scrub.

Now in tiger stripe wraps, Bohning tiger stripe Blazer wraps are the perfect match for the Blazer tiger stripe vanes they are sure to put a bit more excitement into your shooting.

Simple and easy "roll-on" application. It is suggested that you use a semi-soft flat surface, like a mouse pad to apply the wrap to the shaft. Works great with all adhesives.

Blazer Tiger Wraps come in a convenient 12 pack and to minimise overlap are 4" x 1.125" wide. With Bohning 4 inch Carbon Blazer Arrow Wraps or sometimes called Bohning Blazer Wraps, you can easily fletch your vanes with any fletching adhesive.

The Bohning Blazer Tiger arrow wrap 4 inch carbon is 1.125" wide and is for standard carbon 19-64 arrow shafts and is sold in packs of 12 wraps.

• Sold as 12 pack

To apply wraps. Clean all old adhesive from arrow shaft using alcohol or thinner. Prep shaft surface using Bohning SSR cleaner which can be purchased separately or an abrasive detergent.

Shaft surface should appear dull, not shiny. Remove wrap. Place wrap on a flat surface, adhesive side up. Align shaft with edge of wrap and roll with steady motion and pressure.

To remove wraps. There are 3 options. Soak in hot tap water for approximately five minutes and peel wrap off. Alternatively, heat wrap with hair dryer until soft and peel wrap off. Alternatively, scrape wrap off using a removing tool like The Bohning "Stripper" glue, vane and arrow wrap remover. Always clean shaft after removing wrap.